My Pride and Joy

A place to share ideas and advice regarding DIY BDSM equipment.
User avatar
lawman
Frequent Visitor
Frequent Visitor
Posts: 22
Joined: Thu Sep 26, 2019 8:08 pm
Gender:
Contact:

My Pride and Joy

Unread post by lawman » Tue Nov 26, 2019 2:03 pm

This is a little winter project I built a few years ago. I made everything including the leather straps and the cushions which are covered in marine vinyl. It is fully adjustable and breaks down for storage in about 15 mins (takes about 20 to set up) and fits under our bed. I have made a few changes since these photos were taken but nothing major, just a couple things for comfort and stability. Last winter I added stirrups. Those things are expensive here in the states even used.I found an affordable pair (new) out of Germany (those crazy Germans). I again used T-slot and added a few pieces to the side of the upper leg supports that allow adjustability and removal of the stirrups. My only issue is the arms do not want to stay locked. I am open to suggestions. The arm pieces are just too heavy for the T-slot lock to hold them. I have been thinking about making a plate with holes and using either a spring loaded or screw type of peg to go into the hole to keep it in place. This would still allow plenty of adjustability I think. I am open to any suggestions. Let me tell you it is just as much fun to be the "sitee" or the "siter." My wife has named this "Stickman."
Image1.jpg
Image1.jpg (52.63 KiB) Viewed 221 times
Image2.jpg
Image2.jpg (132.11 KiB) Viewed 221 times
Image3.jpg
Image3.jpg (120.55 KiB) Viewed 221 times
Image4.jpg
Image4.jpg (138.38 KiB) Viewed 221 times
Image5.jpg
Image5.jpg (137.19 KiB) Viewed 221 times
Image6.jpg
Image6.jpg (137.19 KiB) Viewed 221 times



User avatar
Joanne
Site Admin
Site Admin
Posts: 189
Joined: Wed Aug 14, 2019 12:52 am
Location: Derbyshire, UK
Gender:
Contact:

Re: My Pride and Joy

Unread post by Joanne » Mon Dec 02, 2019 2:44 pm

Stickman looks fantastic, it is a work of art. I think your idea of plates with holes in them and a locking pin would be the best solution. Another would be to add to the height and use two pulleys to hold the weight of the arms, with the cord going from the top to the tips of each arms. You could then use the pulleys to adjust them and then simply lock of the cords on a figure of eight sailing style block.
I'm just a kinky married mother of two who enjoys playing with sex toys and telling the internet all about it. ;)

User avatar
lawman
Frequent Visitor
Frequent Visitor
Posts: 22
Joined: Thu Sep 26, 2019 8:08 pm
Gender:
Contact:

Re: My Pride and Joy

Unread post by lawman » Mon Dec 02, 2019 7:57 pm

So here is what I am thinking. I can but another plate and lock on the front side. It will be out of the way but I will have to trim the end of the arm a bit which I do not mind. I wonder if having 2 locking points would help? The cable deal would make it too difficult to break down and store. I would have to have plates made if I went with the spring loaded pin and hole route. That could get expensive.

User avatar
StimDog
Frequent Visitor
Frequent Visitor
Posts: 24
Joined: Wed Aug 14, 2019 4:49 pm
Gender:
Contact:

Re: My Pride and Joy

Unread post by StimDog » Mon Dec 02, 2019 8:47 pm

That is amazing, it must be so much fun to play with someone on it.

User avatar
lawman
Frequent Visitor
Frequent Visitor
Posts: 22
Joined: Thu Sep 26, 2019 8:08 pm
Gender:
Contact:

Re: My Pride and Joy

Unread post by lawman » Tue Dec 03, 2019 1:10 pm

StimDog wrote:
Mon Dec 02, 2019 8:47 pm
That is amazing, it must be so much fun to play with someone on it.
StimDog, You have no idea. It is a blast!!!

User avatar
StimDog
Frequent Visitor
Frequent Visitor
Posts: 24
Joined: Wed Aug 14, 2019 4:49 pm
Gender:
Contact:

Re: My Pride and Joy

Unread post by StimDog » Wed Jan 01, 2020 9:22 pm

It certainly looks it, very nice work.

User avatar
lawman
Frequent Visitor
Frequent Visitor
Posts: 22
Joined: Thu Sep 26, 2019 8:08 pm
Gender:
Contact:

Re: My Pride and Joy

Unread post by lawman » Mon Jan 06, 2020 4:08 pm

StimDog wrote:
Wed Jan 01, 2020 9:22 pm
It certainly looks it, very nice work.
Thank you very much.

User avatar
Dave4u69
Familiar Face
Familiar Face
Posts: 5
Joined: Fri Jan 31, 2020 1:12 pm
Location: Manchester
Gender:
Contact:

Re: My Pride and Joy

Unread post by Dave4u69 » Fri Jan 31, 2020 1:20 pm

WOW, I am impressed that is a right labour of love. I can only imagine the fun that has been had on it.

User avatar
lawman
Frequent Visitor
Frequent Visitor
Posts: 22
Joined: Thu Sep 26, 2019 8:08 pm
Gender:
Contact:

Re: My Pride and Joy

Unread post by lawman » Fri Jan 31, 2020 9:22 pm

Dave4u69 wrote:
Fri Jan 31, 2020 1:20 pm
WOW, I am impressed that is a right labour of love. I can only imagine the fun that has been had on it.
Yep. Stickman always looks forward to someone sitting on his lap and holding them in a very warm and firm embrace.

Post Reply